Archives

Volume 6 Number 8 October 2020

Mulching and Irrigation Practices on Cocoa Seedling Survival and Field Establishment


Authors: M. M. Akpalu ; G. K. Ofosu-Budu ; F. K. Kumaga ; K. Ofori ; E. Oppong-Danso
Pages: 126-132
DOI: doi.org/10.32861/jac.68.126.132
Abstract
Irrigation experiments of cocoa tend to concentrate on yield of matured cocoa trees compared to field establishment of young seedlings. Seedling survival leading to optimum population density are fundamental to obtaining maximum yield of crops. The aim of this experiment was to determine the effect of mulching and irrigation on survival of hybrid cocoa clone raised in three different growing media during the establishment phase. The experimental design was a 2 x 2 x 3 factorial arranged in a split-split plot design, with irrigation as the main plot factor, mulching as the subplot factor and growing media as the sub-sub plot factor with three replications. Cocoa pod husk (CPH) was used as the mulching material and each plant received 5kg at a rate of 5.6 t/ha. Irrigation was done daily by applying 4L of water except when it rains. Data was collected on soil moisture, plant height, leaf number, stem girth and plant survival. Results indicated that irrigation and mulching significantly (P<0.01) enhanced soil moisture. Cocoa seedlings raised in topsoil, mulched and irrigated significantly (P<0.05) increased survival rate (94.5%) compared to seedlings raised in soil without irrigation and no mulching (47.1%). Similarly, the survival rate of seedlings raised in growing media M2, mulched and irrigated (93.0%) was significantly (P<0.05) higher than similar seedlings without irrigation (73.4%). However, the survival rate of seedlings raised in M3 without mulching but irrigated was significantly (<0.05) higher 92.1% compared to seedlings raised in M3 mulched and irrigated 67.1%. Irrigation is very important in ensuring high survival rate during early field establishment.  Mulching with cocoa pod husk without irrigation did not improve cocoa seedling survival.



Productivity of Melon Shelling Technology and Preference by Rural Women in Nigeria


Authors: Oyediran Wasiu Oyeleke
Pages: 119-125
DOI: doi.org/10.32861/jac.68.119.125
Abstract
Few years ago National Centre for Agricultural Mechanization (NCAM) launched melon sheller to reduce burden of obtaining melon oil and cake, and to enhance rural women’s productivity. This study looked at the productivity of promoted melon shelling technology and preference by rural women in Nigeria. Data were gathered from the NCAM workshop and survey of melon processors in Niger State. In the workshop, it was found that time allowed for soaking melon and covering with piece of clothes contributed to the productivity of the sheller. Results from survey revealed that 95.1% of the respondents’ preferred Internal Combustion technology and 90.2% liked electric-driven melon shellers over the manual one. Also, 69.5% obtained the shellers from local fabricators rather than NCAM. The technology led to increased turnout of melon (378kg/hr) and reduced wastages to 1.26kg out of 75.6kg. The study concluded that the promoted melon sheller is efficient and have positive implication on the rural women’s productivity and revenue. The study recommends that the rural women should put the melon sheller into its maximum capacity use. The NCAM should extend training to the local fabricators so that they can improve on the technology most especially in the areas of winnowing and washing of melon kernels.



Effects of Nitrogen and NPS Fertilizer Rates on Fresh Yield of Garlic (Allium sativum L.) at Debre Berhan, Ethiopia


Authors: Getachew Amare ; Temesgen Mamo
Pages: 113-118
DOI: doi.org/10.32861/jac.68.113.118
Abstract
Keeping in view of lack of recommended rates of N and NPS fertilizers, a field experiment was conducted to evaluate the effect of the newly introduced NPS fertilizer and nitrogen on growth, physiology and above ground biomass of garlic. Four NPS (0-0-0, 78.75-69-12.75, 105-92-17 and 131.25-115-21.25 kg N-P-S ha-1) and three nitrogen fertilizer rates (114.13, 228.26 and 278.33 kg N ha-1) were laid out in Randomized Complete Block Design with three replications. Significantly highest plant height (28.02 cm), leaf diameter (1.27 cm), dry and fresh weight (4.71 g and 6.11 g) and leaf length were recorded on garlic plants supplied with 105-92-17 kg N-P-S ha-1 and also the highest plant height (27.75 cm), leaf length (24.02 cm), fresh and dry weight (6.23 g and 5.04 g) were recorded on garlic plants supplied with 278.33 kg N ha-1. The interaction effect also show a significant effect in almost all the growth parameters; the early day to 50% emergence was recorded from a plot which received 228.26 kg N ha-1 and 105-92-17 kg NPS ha-1 and the highest plant height, leaf length, fresh and dry above ground biomass and leaf diameter were 29.62 cm, 25.60 cm, 6.93 g, 5.59 g and 1.4 cm, respectively were observed by the interaction of 278.33 kg N ha-1 and 105-92-17 kg N-P-S ha-1 with no significant difference with 228.26 N and 78.75-69-12.75 kg N-P-S ha−1. From this one season experiment, fertilizer rates 307.01-69-12.75 kg N-P-S ha−1 could be recommended for garlic production.



Socio-Economic Contributions of Forest Products to Rural Livelihood: A Case Study of Aramoko Forest Reserve Ekiti-State


Authors: Olujobi O. J. ; Olajuyigbe B. J.
Pages: 105-112
DOI: doi.org/10.32861/jac.68.105.112
Abstract
In the past, conservation effort has primarily focused on establishment of forest reserves for timber production, with minimal or no consideration to how these natural resources will help sustain or improve livelihoods of adjoining communities. This study examined the contribution of Aramoko forest reserve to the livelihoods of the adjoining communities in Ekiti State. One hundred and twenty pre-tested questionnaires were administered among the products collectors in the study area. Data collected were analysed and the result showed that 78.3 % of the respondents are married with 52.3 % of them male, while 50.8 % of the respondents aged between 51-70 years with 64.1 % having at least secondary education. Twenty-five (25) different products were collected by the respondents in the study area. These products include among others; timber with highest frequency of (120) followed by herbal plants (115), Archantina marginata (105), Thaumatococcus danielli (89), Bridelia ferruginea (70) and Irvingia garbonensis (65). The use of motor cycle accounted for 41.4 % of the respondents means of transportation, while 31.3 % of the respondents sell their product in bit at the village market. Picking, digging, plucking, cutting and uprooting were methods used for harvesting by the respondents while illegal felling (24 %) and indiscriminate bush burning (22.4 %) were the major conservation problem in the study area. Specifically, some of the products harvested are used for food, medicine, fuelwood, herbs and cultural purposes. The study recommends that research should be conducted into how these products can be artificially raised in the nursery for plantation establishment.